DOWNLOAD LINK AT THE END OF THE POST
I am trying to keep up with lots of designs that I’ve feel so interested in, and this week it is the Lucinda puffed sleeve maxi dress – a must have item for summer!
This dress is inspired by a 308 dollar dress by ASOS, of course I believe the cost should lie with the lovely ombre fabric and nice embroidery, but the overall silhouette is easy to copy: a loose fitting bodice, gathered skirt and voluminous puffed sleeve. The closure is invisible side zipper.
This is a closer look at the dress:
As usual, my pattern is made in 10 sizes from XXS to 5XL, so you will find yourself a suitable size. You can also lengthen or shorten the hemline to get your desired length – you can even make a maxi skirt from this pattern.
The pattern is made using layered PDF, please check for your desired size before printing so you won’t waste your paper. I have included a first page with many details about sizing and printing, so please first read the first page and make sure you know what size you need! If you still do not know how to print a layered PDF, please check for the printing instruction in this post: PRINTING GUIDE.
You can print this using your home printer and A4/Letter paper. I calculated the printing area so that you will be able to use either type of paper to print the pattern out perfectly. Always print the first page first and check with the test square if you are printing at the right scale before you print out the whole pattern – avoid waste of ink and waste of paper, save the earth!
Some PC may print smaller than actual size even when you choose 100% scale – I don’t know why this problem exist, but my HP laptop cannot print true to size. I have to scale up to 103% to get the right size. You may need to check with your PC to see if it prints true to size, if not, scale up a bit.
SEWING INSTRUCTION
You will need
- Fabric of your choice
- Invisible zipper
- Some button for the back, or you can use fabric straps to tie
- Some elastic for the sleeves
- Scissors, pencil or fabric marker, ruler, pins
- Sewing machine/Serger or needle and thread
- Printed pattern
What fabric can be used for this project? This design is made for woven fabric. Because it has a lot of gatherings, just make sure you use thin fabric to get a light feel and reduce bulkiness. I suggest pure cotton or linen fabric for a breathable summer days!
How much fabric do you need for this piece of garment? To be precise, you may need to check how much fabric you need before buying. It will depend on the selected pattern size, the width, and design of the fabric you plan to use. Just to be sure, print all the paper patterns and lay them out at the width of fabric you plan to use (usually from 90 to 150 centimeters or 35 to 60 inches). Measure how much fabric you will need. Don’t forget to account for pieces that need to be cut multiple times and pieces that are cut on the fold.
For this pattern, you will need to use a sewing machine that has the function to sew stretch fabric (zig zag stitch for example), or use a serger which is designed to sew stretch fabric nicely.
Cutting instruction:
After printing out and taping all the 30 pattern pages together, you will get something similar to this image:
You will see that there are 2 sets of lines on each pattern size. The inner lines are sewing line (and you sew along these lines), and the outer lines are cutting lines (you cut the fabric along these lines, remember the folding lines where you have to fold the fabric before cutting). The distance between sewing line and cutting line is seam allowance, and it varies from point to point. For example, the side seam allowance is about 1/2 inch (1.2cm), and seam allowance at hemline is 1 inch (2.5cm). This is the reason why I do not remove the sewing lines from the pattern. Please use it as a guide to know how much seam allowance you need to give at each seam.
Fabric will be cut into following pieces:
- Front: cut 1 pc on the fold
- Back: cut 2 pcs
- Sleeve: cut 2 pcs
- Skirt: cut 2 pcs on the fold
- Bias neck line binding: cut 1 pc
Make sure to mark all notches and other design features such as darts, pleats etc. from the pattern pieces onto your fabric. When sewing the garment, pay attention to notches, they must match up.
Sewing instruction:
1. Serge/zig zag stitch the raw edge to prevent fabric from unraveling.
2. Place 2 Back pieces right side facing. Sew about ½ inches from the lower edge toward the neckline just to attach 2 pieces together. Press the seam allowance in and sew a narrow hem all the way toward the neckline.
3. Sew 2 parallel lines using longest stitch length at ¼ inch and ½ inch from the top of the skirt. Pull the lower threads to gather the fabric so that it matches the width of the lower edge of bodice piece. Do this with both front and back pieces.
4. Place a Skirt piece and Front Bodice right side facing. Pin and sew to join. Repeat with the other Skirt piece and Back Bodice.
5. Place Front and Back dress right side facing. Pin and sew the shoulder seams and one side seam.
6. Attach invisible zipper to the remaining side seam. Sew to finish the side seam.
7. Gather the sleeve cap using the same method in step 3.
8. Sew the side seam of the Sleeve pieces.
9. Fold and sew to finish the hem of the Sleeve, leaving a small opening to insert elastic. The length of elastic should be the circumference of your bicep plus 1 inch. Sew the ends of the elastic, push it in the casing and sew to close the casing.
10. Turn the sleeve inside out. Place it to the armhole of the garment so two pieces are right side facing. Adjust the gathering at the sleeve cap to match the notches on the armhole. Pin and sew to attach sleeve to the armhole. Do this with both sleeves.
11. Use bias tape to finish neckline. Attach buttons and hooks at the center back.
12. Finish by hemming the skirt.
And here is the download link:
LUCINDA PUFFED SLEEVE MAXI DRESS (SIZE XXS – 5XL)
Happy sewing! And don’t forget to share your project on my Facebook page: Tiana’s Closet Sewing Patterns
Tiana
One thought on “Lucinda puffed sleeve maxi dress – free pdf sewing pattern”
Comments are closed.