Effortlessly modern with clean architectural lines, the Lenka Top is a timeless wardrobe staple designed for sewists who appreciate minimalist style with thoughtful details. The asymmetrical front flap and delicate side tie create a contemporary silhouette while maintaining a comfortable, easy-to-wear fit.
Designed for woven fabrics, Lenka pairs beautifully with tailored trousers, wide-leg pants, linen shorts, or skirts, making it an elegant piece for both everyday wear and special occasions.
Front view
Back view
Side view
Pattern Details
- Sizes: XXS – 5XL
- Format: Layered PDF (A4/US Letter, A0, and Projector files included)
- Refer to the SIZE GUIDE and PRINTING GUIDE in the pattern or linked guide before printing
- Always print the test square first to confirm accurate scaling
Note: Some printers may not print true to size at 100%. Adjust scaling if needed (e.g., 103%) and verify with the test square.
FINISHED GARMENT MEASUREMENTS
SEWING INSTRUCTION
PATTERN PIECES
The pattern pieces are as follows:
- Front: cut 1 piece
- Back: cut 1 piece
- Overlay Flap: cut 1 piece
- Neck Binding: cut 1 piece
- Armhole Binding: cut 2 pieces
- Tie Strap: cut 2 pieces
SEAM ALLOWANCE
- All seams: 1cm (3/8”)
- Seam allowance has been included in the pattern pieces. Cut pattern as is and use the above-mentioned seam allowance when constructing the garment.
CUTTING INSTRUCTION
Place the pattern pieces on the fabric, pin the pattern pieces to the fabric to secure them in place. Using sharp scissors, carefully cut out the fabric pieces along the outer lines of the pattern. Take your time to ensure precise and clean cuts, as this will affect the fit and overall appearance of your garment.
Make sure to mark all notches and other design features such as darts, pleats, draw marks etc. from the pattern pieces onto your fabric. When sewing the garment, pay attention to notches, they must match up.
SEWING INSTRUCTION
1. Stabilize the edges
- Apply fusible stay tape on the wrong side of fabric, along the shoulder and the neckline seams of the garment to stabilize the fabric to prevent stretching.
- You can also use clear elastic to stabilize the seams.
2. Sew the tie straps
- Fold the tie strap piece lengthwise, and press to get a center crease.
- Fold the long edges of the tie strap to the center crease, wrong sides together, and press again.
- With the raw edge meeting at the center crease, fold the tie strap again, so that the two edges match.
- Topstitch along the edges to create a tie strap.
3. Finish the edges of the front flap
- Fold the straight edges of the front flap (the longest straight edge to the wrong side of fabric and topstitch.
- Place one tie strap at the pointed corner of the front flap, on the wrong side of fabric, and stitch it to attach to the end of the front flap.
4. Sew the front of the garment
- Fold the hem of the Front piece to the wrong side of fabric and topstitch to finish the hem.
- Place the other tie strap at the notch on the side seam at the right side of the Front garment. Baste to secure position.
- Place the Front piece on a flat surface, right side up. Place the front flap on top of the Front piece, also right side up. Match the top edge of the flap with the notch on the side seam of the left side of the Front piece. Baste along the overlapping edge of the side seam, catching both layers.
5. Finish the hem of the back garment
- Fold the hem of the Back piece to the wrong side of fabric and topstitch to finish the hem.
6. Sew the main garment
- Place the Front and Back garment right sides together, match the side seams and shoulder seams and stitch.
7. Finish neckline and armhole
- Video tutorial: https://www.youtube.com/watch?v=TLnH0Qpprnw
With its clean lines, elegant asymmetrical wrap detail, and timeless silhouette, the Lenka Wrap Top is a versatile pattern you’ll reach for again and again, whether sewn in crisp linen for summer or a flowing rayon for a softer, more sophisticated look.
You can download the pattern for free from here: