The Amiri maxi dress was inspired by a design by Attico, with the price tag of $1,600 (but now sold out). It was worn by Dakota Johnson and was such a darling! This dress is suitable for formal events, like weddings, company gatherings and such.
Let’s have a closer look at the design:
Tiana’s Closet sewing patterns are made in 10 sizes from XXS to 5XL so you may find a suitable size for yourself. If you are not sure which size suits you, take a look at the measurement table before doing anything here: SIZE GUIDE.
The pattern is made using layered PDF, please check for your desired size before printing so you won’t waste your paper. I have included a first page with many details about sizing and printing, so please first read the first page and make sure you know what size you need! If you still do not know how to print a layered PDF, please check for the printing instruction in this post: PRINTING GUIDE.
My patterns are now made in both A4/Letter paper and A0 paper format so you can print at home or at any print shop!
For home printers, you can print this using your home printer and either A4 or Letter paper. I calculated the printing area so that you will be able to use either type of paper to print the pattern out perfectly. Always print the first page first and check with the test square if you are printing at the right scale before you print out the whole pattern – avoid waste of ink and waste of paper, save the earth!
Some PC may print smaller than actual size even when you choose 100% scale – I don’t know why this problem exist, but my HP laptop cannot print true to size. I have to scale up to 103% to get the right size. You may need to check with your PC to see if it prints true to size, if not, scale up a bit. I was informed by a reader that you can also print the pdf as image to get the right scale, however I never tested it on my computer.
SEWING INSTRUCTION
You will need:
- Fabric of your choice. This pattern is intended for woven fabric
- Invisible zipper for back closure
- Scissors, pencil or fabric marker, ruler, pins
- Sewing machine/Serger or needle and thread
- Printed pattern
How much fabric do you need for this piece of garment? To be precise, you may need to check how much fabric you need before buying. It will depend on the selected pattern size, the width, and design of the fabric you plan to use. Just to be sure, print all the paper patterns and lay them out at the width of fabric you plan to use (usually from 90 to 150 centimeters or 35 to 60 inches). Measure how much fabric you will need. Don’t forget to account for pieces that need to be cut multiple times and pieces that are cut on the fold.
Cutting instruction:
After printing out and taping all the pattern pages together, you will get something similar to this:
You will see that there are 2 sets of lines on each pattern piece. The inner lines are sewing line (and you sew along these lines), and the outer lines are cutting lines (you cut the fabric along these lines, remember the folding lines where you have to fold the fabric before cutting). The distance between sewing line and cutting line is seam allowance, and it varies from point to point. For example, the side seam allowance is about 1/2 inch (1.2cm), and seam allowance at hemline is 1 inch (2.5cm). This is the reason why I do not remove the sewing lines from the pattern. Please use it as a guide to know how much seam allowance you need to give at each seam.
The fabric will be cut into following pieces:
- Front Yoke: cut 1 on the fold
- Front Bodice: cut 1 on the fold
- Front Waistband: cut 1 on the fold
- Front Skirt: cut 1 on the fold
- Back Yoke: cut 2 mirrored
- Back Bodice: cut 2 mirrored
- Back Waistband: cut 2
- Back Skirt: cut 2 mirrored
- Sleeve: cut 2 mirrored
- Collar: cut 2
Place the pattern pieces on the fabric, pin the pattern pieces to the fabric to secure them in place. Using sharp scissors, carefully cut out the fabric pieces along the outer lines of the pattern. Take your time to ensure precise and clean cuts, as this will affect the fit and overall appearance of your garment.
Make sure to mark all notches and other design features such as darts, pleats, draw marks etc. from the pattern pieces onto your fabric. When sewing the garment, pay attention to notches, they must match up.
Sewing instruction:
1. Serge the raw edges to prevent fabric from unravelling.
2. Gather the top edge of the Front Bodice so that it matches the bottom edge of the Front Yoke. You can refer to a video tutorial on how to create perfect gathering here: How to gather fabric.
3. Gather the lower edge of the Front Bodice to match the top edge of the Front Waistband.
4. Gather the top and lower edge of the Back Bodice to match the lower edge of Back Yoke and top edge of Back Waistband.
5. Place Front Bodice and Front Waist right sides together. Pin and sew to join to get the Front Bodice.
6. Sew the waist darts on the Front Skirt.
7. Place the Front Bodice and Front Skirt right sides facing. Pin and sew to get the Front Dress.
8. Repeat the steps above to get the Back Dress pieces.
9. Place Front Dress and Back Dress right sides facing. Match all the seams, pin and sew the shoulder and side seams. Repeat with the other Back Dress piece to get the Main Garment.
You can also add side seam pocket to the garment, following this instruction: How to add a side seam pocket.
10. Sew the underarm seam of the Sleeve.
11. Turn the Sleeve right side out, pin it to the armhole opening of the Main Garment, right sides facing. The notch on the sleeve cap matches the shoulder seam, the two notches on the back armscye match the seam and notch on the back armhole, and the notch on the front armscye matches the seam on the fron armhole. Pin and sew to attach Sleeve to the Main Garment. This is a guide on How to sew set in sleeve.
12. Install invisible zipper to the back of the dress and finish the center back dress seam. This is a guide on How to sew invisible zippers.
13. Place two Collar pieces right sides facing, sew around along the short sides and upper edge together. Clip the corners and turn the Collar right side out, staystitch the seam allowance to one Collar piece (the one that will be on the inside of the dress).
14. Pin the Collar to the Main Garment and sew to attach.
15. Fold and sew the hem of the sleeve and skirt. Give it a good ironing and you’re done!
Although there is some advanced sewing skill needed for this project, I believe you will feel happy with the result!
And here is the download link:
AMIRI MAXI DRESS SIZE XXS-5XL (A4 LETTER PAPER)
AMIRI MAXI DRESS SIZE XXS-5XL (A0 PAPER)
To download just click on the link above and choose “Save link as”. The PDF file will be downloaded to your device. An advertisement may pop up, just close it and continue with your download. In case some ads attempt to make you enter your personal info, just ignore and close it. I do NOT require any kind of information to download my pattern files.
IMPORTANT NOTICE: Because of many cases of copyright infringement, I have restricted permission on my patterns from now on and you will not be able to open it using pdf editing software like Adobe Illustrator, Corel Draw etc. Please use PDF readers to open and view the files – there are many free PDF readers that offer layer viewing and printing, like Adobe Reader, Foxit Reader…
Happy sewing! And don’t forget to share your project on my Facebook page: Tiana’s Closet Sewing Patterns or tag me on Instagram #tianasclosetsewingpatterns, I will be thrilled to see the garment in real life!
